ASSEMBLY INSTRUCTIONS Description .
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. IMPORTANT NOTE: - - - Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Qty A Top 1 Sketch HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Bolt (M6 x 35mm) 3 Flat washer (6.5 x 13mm) Sketch NO Description Qty 4 2 Lock washer (6.
STEP 2 Attach top (A) to the base (B) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (4).
STEP 3 Unlock the table top from both sides underneath of the top as shown below. Pull the 2 parts of the table top apart.
STEP 4 Place the leaf in the center of the open table top. Push the table top closed. Lock the mechanism underneath 2 sides of the table top as shown below.
