Assembly Instruction

PREPARATION

The legs and hardware are located underneath the chair

in the zipper compartment.

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.

If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 10 minutes.

Tools Required for Assembly (included): Allen Key

STEP1 OPEN THE ZIPPER ON THE UNDERSIDE OF THE SEAT AND

TAKE OUT LEGS AND HARDWARE

STEP2 PUT THE WASHERS ON THE BOLT IN THE ORDER SHOWN

IN THE PICTURE

ATTENTION

CORRECT INCORRECT

STEP3 INSERT THE FRONT LEGS AND SCREW IN THE BOLTS BUT

DON'T TIGHTEN COMPLETELY

STEP4 INSERT THE BACK LEGS AND SCREW IN THE BOLTS BUT

DON'T TIGHTEN COMPLETELY

STEP5 PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS ARE

LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE

THE CHAIR IS UPRIGHT AS PICTURED ABOVE

STEP6 CLOSE THE ZIPPER ON THE UNDERSIDE OF THE SEAT,

THIS ITEM MAY REQUIRE PERIODIC TIGHTENING