Assembly Instruction

PIECE QUANTITY
A 1X
B
1X
C
1X
D
1X
E
1X
H1 8X
Weight Capacity: 275 lbs
H2 8X
WARNING: DO NOT STAND ON CHAIR
H3 8X
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
H4 1X
Allen bolt
Spring washer
THE DESIGN OF THE CHAIR IN THE DRAWINGS MAY VARY
FROM YOUR ACTUAL CHAIR, BUT ASSEMBLY IS THE SAME
ON ALL MODELS.
Back leg-1
Back leg-2
DESCRIPTION
PICTURE
SEAT
Front leg-1
Flat washer
Allen key
The legs and hardware are located underneath the chair in the
zipper compartment.
Front leg-2
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
ASSEMBLY INSTRUCTIONS APPLICABLE FOR ALL
OUR DINING CHAIRS.