Owner Manual

Place the Pack of Seat(A) and Back with legs(B) on the side of a
table with the Seat(A) facing down, as seen in the picture.
Insert Front Leg(C) into the mounting position of Seat(A) and
attach using Bolts(①), Spring Washers(②) and Washers(③) with
Allen Key(④).
Do not fully tighten the Bolts.
Repeat the same process to attach the remaining one Leg. Attach
each leg using 2 Bolts.
Step 4
1 if wobble
2 30-50cm
3 Test again
Page 6 OF 8