Assembly Instructions

Please read instructions carefully
Remove all wrapping materials, staples and packing straps from the carton. Refer to Parts List and Hardware List and ensure they are complete
before you start assembling. Place all wooden parts on a clean, flat and soft surface (e.g carpet or rug) to prevent parts from being scratched.
CAUTIONS: 1) DO NOT FULLY TIGHTEN BOLTS AND NUTS UNTIL ALL PARTS HAVE BEEN ASSEMBLED.
PARTS LIST (FOR 1 NOS. OF TABLE)
NO. QTY.
P1
TABLE TOP WITH APRONS
1
P2 TABLE LEG 4
HARDWARE LIST (FOR 1 NOS.OF TABLE)
NO. QTY.
H1 JCBC SCREW M8 X 80 8
H2 SPRING WASHER 8
H3 FLAT WASHER 8
H4 ALLEN KEY M4 1
COMPLETE ASSEMBLY
ASSEMBLY INSTRUCTIONS
COMPONENT
DESCRIPTION
2) DO NOT OVER-TIGHTEN BOLTS AND NUTS UNTIL ALL PARTS HAVE BEEN ASSEMBLED.
3) KEEP ALL HARDWARE PARTS OUT OF REACH OF CHILDREN.
CARE AND MAINTENANCE
SAFETY - To avoid any risk of suffocation to children or animals, dispose off the plastic bags immediately.
CLEANING - Clean with damp cloth and mild detergent. Do not use bleach or abrasive products.
FITTINGS - Tighten bolts and nuts from time to time to ensure all parts of product are securely fitted.