Assembly Instructions

ASSEMBLY:
1. Position the chair back on a soft surface such as a carpet. Place the chair apron frame on
to the middle rail of the chair back with the dowel fully inserted into the pre-drilled holes.
Make sure that the screw holes on the apron frame are facing down.
1.1. Insert JCBC Bolt (Long) through a Lock Washer and a Flat Washer into the pre-drilled
holes on the apron frame at rear corners.
1.2. Insert the JCBC Bolt (Short) through a Lock Washer and a Flat Washer into the pre-drilled holes on the apron frame at rear rail.
2. Apply Glue to all the pre-drilled holes before attaching all stretcher. Insert each side stretcher into pre-drilled holes on both of the rear
legs, make sure that screw holes on the stretcher are facing down. Place the assembled front legs to corner block of the frame, and
insert side stretcher into legs.
2.1. Insert the JCBC Bolt (Long) through a Lock Washer, a Flat Washer and the pre-drilled holes of corner block into the pre-drilled holes
on the front leg, use the provided Allen Key but do not fully tighten the bolts yet.
2.2. Insert Pan Head Screw into side stretcher through the pre-drilled holes, tighten with screw-driver (Not Provided).
WARNING :
The use of power tools is
not recommended.
HARDWARE PARTS:
STEP 2
Assemble front leg as shown.
STEP 1
STEP 3
Turn the chair upright.Check its balance and
tighten all screws and bolts to complete the
assembly.
(Fig 1)
k
c
a
B
r
i
a
h
C
Dowel
Allen Key
JCBC Bolt(Long)
Lock Washer
Flat Washer
Allen Key
JCBC Bolt(Short)
Lock Washer
Flat Washer
(Fig.1.1)
(Fig.1.2)
Box
System
Assembly
(Fig 2)
SKETCH
DESCRIPTION
PARTS LIST
Q'TY
1 pc
Chair Back
Front Leg Left
Front Leg Right
Seat
1 pc
1 pc
1 pc
US E T HIS P R ODUC T ONL Y F OR S E AT ING O NE P E R S ON AT TIME
DO NO T US E T HIS P R ODU C T AS A S T E P S T O OL / LADDE R
DO NO T S IT O N ANY P AR T OF THIS P R ODUC T E X C E P T S E AT
DO NO T US E T HIS P R ODU C T ON UNE V E N FL O OR S UR F AC E S
DO NO T US E T HIS P R ODU C T UNLE S S ALL S C R E W S AND B OLT S
AR E T IG HT . AT LE AS T E VE R Y 6 WE E K S C HE C K AL L S C R E W S AND
B OL T S T O MAK E S UR E T HE Y AR E T IG HT .
IF ANY P AR TS AR E MIS S ING , B R OK E N, DAMAG E D OR W OR N
S T O P US E OF T HIS P R O DUC T U NT IL R E P AIR S AR E MADE .
DIS P OS E O F P AC K AG ING P R OP E R LY . P L AS T IC B AG IS NO T A
T OY . DO NOT US E P LAS T IC B AG AS A HE AD C OV E R ING . IT MAY
C AUS E S UF F OC AT ION.
F AILUR E T O F OLLO W T HE S E W AR NING S C O U L D R E S UL T IN
S E R IO U S INJ UR Y .
1 pc
Side Stretcher (Right)
1 pc
Side Stretcher (Left)
JCBC Bolt
(Short)
2 pcs
Pan Head
Screw
4 pcs
JCBC Bolt
(Long)
8pcs
Lock Washer
10 pcs
Flat Washer
10 pcs
Allen Key
1 pce
Glue
1 pce
Left Side
Stretcher
Left Leg
Flat Washer
Lock Washer
JCBC Bolt (Long)
Allen Key
Apply Glue
Right Side
Stretcher
Right Leg
Glue
Pan Head Screw
PANEL BACK SIDE CHAIR
WITH GRAY UPHOLSTERED SEAT