FR902DP

14
IMPORTANT! Remote dispensers and tank top pumps must be installed in accordance
with all local, state, and national electrical code NEC/ANSI/NFPA 70, NFPA 30, NFPA
30A, and NFPA 395.
Your Fill-Rite dispenser cabinet should be installed in a manner that does not use the plumbing to
support the cabinet in any way. Safety and Emergency equipment should be installed per local,
state, and national plumbing for flammable fuels guidelines. The following plumbing diagrams are
suggestion for typical installation scenarios.
Item
Description
1
Remote Pump (for use with FR102PH, FR902DP, FR910PM)
2
Electrical Conduit (Threaded rigid conduit, sealed fittings, conductor seal)
3
Wall Mounted Cabinet Dispenser (FR902DP, FR910PM)
4
Fluid Inlet Pipe ( Threaded pipe joints and connections should be sealed)
5
Safety Breakaway Valve
CAUTION! Threaded pipe joints and connections should be sealed with the
appropriate sealant or sealant tape to minimize the possibility of leaks.
Plumbing Instructions
Typical Wall Bracket Mount Plumbing
1
2
3
4
5
2