Mode d'emploi

Operating Instructions YDP30 15

6. Maintenance

This section presents the clean tools and methods to maintain your printer.

1. Please use one of the following materials to clean the printer.

– Cotton swab (head cleaner pen)

– Lint-free cloth

– Vacuum | blower brush

– 100% ethanol

2. The cleaning process is described as follows:

Printer part Method Interval

Print head

1. Always turn off the printer before

cleaning the print head.

Clean the print head when

changing a new label roll

2. Allow the print head to cool for at least

one minute.

3. Use a cotton swab and 100% ethanol to

clean the print head surface.

Platen roller

1. Turn the power off. Clean the platen roller when

changing a new label roll

2. Rotate the platen roller and wipe it

thoroughly with 100% ethanol and a

cotton swab, or lint-free cloth.

Tear bar | peel bar

Use the lint-free cloth with 100% ethanol to

wipe it.

As needed

Sensor

Compressed air or vacuum Monthly

Exterior

Wipe it with a water-dampened cloth As needed

Interior

Brush or vacuum As needed

– Do not touch the printer head with your hand. If you inadvertently touch it, please use

ethanol to clean it.

– Please use 100% ethanol. DO NOT use medical alcohol which might damage the printer

head.

– In order to maintain the printer’s performance and extend the printer’s service life,

regularly clean the print head and supply sensors when you change to a new media.