User's Manual

Safety Information
(continued)
DANGER—ELECTRIC
SHOCK AND FIRE
Electric current from power,
telephone, and communication
cables is hazardous, and could
result in electric shock and/or
fire.
To avoid electric shock, use
caution when connecting
cables. For example, do not
connect safety extra-low
voltage (SELV) circuits to
telephone-network voltage
(TNV) circuits. LAN ports contain
SELV circuits, and WAN ports
contain TNV circuits. Some LAN
and WAN ports both use RJ-45
connectors. To avoid electric
shock, do not operate the
product or connect or
disconnect cables during
electrical storms.
To avoid electric shock, do not
use this product in or near
water.
To reduce the risk of fire or
overheating, keep this product
in well-ventilated areas, away
from radiators or other heat
sources. Do not block cooling
vents. The plug-socket
combination must be accessible
at all times because it serves as
the main power-disconnecting
device.
Use only the manufacturer-
provided AC adaptor approved
for use with this product. Use of
another AC adaptor may cause
a fire or explosion.
This product relies on short-
circuit (overcurrent) protection
installed in your home or ofce.
Ensure that a fuse or circuit
breaker no larger than 120 VAC,
15A U.S. is used on the phase
conductors (all current-carrying
conductors). Unplug this
product from the wall outlet
12 ©2010 OpenPeak. All Rights Reserved.