User's Manual

114 OL-24484-01
The text of the Emergency Response Notification dialog for the Phone application follows here:
Dialing emergency numbers (for example, 911 or 112) may not work on an enterprise-class IP
telephony network like that used for Cisco Cius. Correct location information may not be passed
on to emergency responders. Your network administrator can advise you about the capabilities of
your network, including the dialing sequence that you will need to use when on or off the
enterprise premises.
Emergency Response Notification for VPN Networks
Whenever you choose to connect to an existing VPN network or choose the option to Add a New VPN
Connection, a dialog displays to warn about the potential disruption of emergency response numbers.
You can proceed to the VPN connection step by pressing OK. You can dismiss the dialog and cancel
the connection by pressing the Back button on your device.
The text of the Emergency Response Notification dialog for VPN networks follows here:
CAUTION — Emergency response numbers (for example, 911 or 112) may not work on software
telephony clients. Your exact location and the appropriate emergency response agency may not be
easily identified. Some countries restrict use of VoIP software via VPN over the Internet, including:
UAE, Saudi Arabia, Pakistan, Lebanon, Jordan, Egypt, Oman, Qatar, Yemen, Algeria, and Kuwait.
External Devices
Cisco recommends using good-quality external devices (such as headsets) that are shielded against
unwanted radio frequency (RF) and audio frequency (AF) signals.
Depending on the quality of these devices and their proximity to other devices such as mobile phones
or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take
one or more of these actions:
• Move the external device away from the source of the RF or AF signals.
• Route the external device cables away from the source of the RF or AF signals.
• Use shielded cables for the external device, or use cables with a better shield and connector.
• Shorten the length of the external device cable.
• Apply ferrites or other such devices on the cables for the external device.
Cisco cannot guarantee the performance of the system because Cisco has no control over the quality
of external devices, cables, and connectors. The system will perform adequately when suitable devices
are attached using good-quality cables and connectors.
Caution In European Union countries, use only external speakers, microphones, and headsets that
are fully compliant with the EMC Directive [89/336/EC].