Writer Guide

Modify the options of the Options page as follows:
1) In the Level box, choose 1.
2) In the Numbering list, choose 1, 2, 3, ....
3) Leave the Before and After boxes unchanged, or delete anything
that is in them.
4) Leave the Character Style field as None.
5) Make sure Start at is set to 1.
6) Show sublevels should be grayed out. Do not select Consecutive
numbering.
As discussed above, the numbering list will adopt settings of the
underlying paragraph style. If you want to use a special font, size or
color for the numbering, you can create a character style and apply it
in the Options page.
If you want the word Track to appear before the number, just add it to
the Before field in the Options dialog box. Do not forget to add a space
character to separate the word from the number.
Set up the final parameters of the CDTracks list style in the Position
page.
1) In the Level box, choose 1.
2) For Numbering followed by , choose tab stop and set it at 4.0cm.
3) For Numbering alignment, choose Right.
4) For Aligned at choose 1.5cm. (this refers to the alignment of the
numbers)
5) For Indent at choose 4.0cm. (This sets the indentation of the
whole list.) Click OK to finish.
Applying the list style
Now that the list style is available, it can be quickly applied to any list
in the document:
1) If starting a new list, before pressing Enter to start a new line,
double-click on the desired list style name in the Styles and
Formatting window.
2) If you already have a list, select it and then double-click on the
desired list style name in the Styles and Formatting window.
Note
Remember that applying a list style does not affect the
characteristics of the underlying paragraph; therefore you may
want to check if you are satisfied with the paragraph style
before applying the list style.
Chapter 7 Working with Styles 261