Impress Guide

Figure 70: Available shapes for Impress
The second part of the toolbar, shown in Figure 71, contains more
generic tools.
1 Edit Points 4 From File 7 Alignment 10 Interaction
2 Glue Points 5 Gallery 8 Arrange 11 Visible Buttons
3 Fontwork 6 Rotate 9 Extrusion ON/Off
Figure 71: The second section of the drawing toolbar with
utility tools
Those tools are:
• Edit points: select this tool, then select a shape or a line, to edit
the individual points that form the shape or line.
• Glue points: select this tool to edit the glue points of a graphic
object. Glue points are the positions where connector lines
terminate or start. See “Managing glue points” on page 110 for
instructions.
• Fontwork: opens the Fontworks gallery. See “Using Fontwork” on
page 122 for further information.
• From file: equivalent to Insert > Picture > From file on the
main menu. See Chapter 4 for details.
• Gallery: opens the gallery. Equivalent to Tools > Gallery on the
main menu. See Chapter 4 for details.
Chapter 5 Creating Graphic Objects 107