Datasheet

Description STM32H743xI
14/231 DS12110 Rev 5
STM32H743xI devices operate in the –40 to +85 °C temperature range from a 1.62 to 3.6 V
power supply. The supply voltage can drop down to 1.62 V by using an external power
sup
ervisor (see Section 3.5.2: Power supply supervisor) an
d connecting the PDR_ON pin to
V
SS
. Otherwise the supply voltage must stay above 1.71 V with the embedded power
voltage detector enabled.
Dedicated supply inputs for USB (OTG_FS and OTG_HS) ar
e available on all packages
except LQFP100 to allow a greater power supply choice.
A comprehensive set of power-saving modes allows the design of low-power applications.
STM32H743xI devices are offered in 8 packages ranging from 100 pins to 240 pins/balls.
Th
e set of included peripherals changes with the device chosen.
These features make STM32H743xI microcon
trollers suitable for a wide range of
applications:
 Mo
tor drive and application control
 Medical equipment
 Industrial applications: PLC, inverters, circuit breakers
 Printers, and scanners
 Alarm systems, video intercom, and HVAC
 Home audio appliances
 Mobile applications, Internet of Things
 Wearable devices: smart watches.
Figure 1 shows the general block diagram of the device family.
Table 2. STM32H743xI features and peripheral counts
Peripherals
STM32H
743VI
STM32H
743ZI
STM32H
743AI
STM32H
743II
STM32H
743BI
STM32H
743XI
Flash memory in Kbytes 2048
SRAM in
Kbytes
SRAM mapped onto
AXI bus
512
SRAM1 (D2 domain) 128
SRAM2 (D2 domain) 128
SRAM3 (D2 domain) 32
SRAM4 (D3 domain) 64
TCM RAM in
Kbytes
ITCM RAM
(instruction)
64
DTCM RAM (data) 128
Backup SRAM (Kbytes) 4
FMC Yes
Quad-SPI Yes
Ethernet Yes