Manualshelf

Data Sheet

ManualsBrandsOpenMV ManualsCameras & Vision SensorsOpenMV Cam H7 Image Sensor
27282930313233343536
O
mni
TM
ision
DESCRIPTION OF CHANGES (CONTINUED)
• In Table 6 on page 17, changed names of registers 0x46, 0x47, 0x48, 0x49, 0x4A, and
0x4B from “LCC0”, “LCC1”, “LCC2”, “LCC3”, “LCC4”, and “LCC5” to “LC_CTR”,
“LC_XC”, “LC_YC”, “LC_COEF”, “LC_RADI”, and “LC_COEFB”
• In Table 6 on page 17, changed description of register 0x47 from “Lens Correction Option
1 – X Coordinate of Lens Correction Center Relative to Array Center” to:
X Coordinate of Lens Correction Center Relative to Array Center
Bit[7]: Sign bit
0: Positive
1: Negative
Bit[6:0]: X coordinate of lens correction center relative to array center
• In Table 6 on page 17, changed description of register 0x48 from “Lens Correction Option
2 – Y Coordinate of Lens Correction Center Relative to Array Center” to:
Y Coordinate of Lens Correction Center Relative to Array Center
Bit[7]: Sign bit
0: Positive
1: Negative
Bit[6:0]: Y coordinate of lens correction center relative to array center
• In Table 6 on page 17, changed description of register 0x49 from “Lens Correction Option
3” to “Lens Correction Coefficient”
• In Table 6 on page 17, changed description of register 0x4A from “Lens Correction
Option 4 – radius ...” to “Lens Correction Radius – radius ...”
• In Table 6 on page 17, changed description of register 0x4B from “Lens Correction Option
5 (effective ...” to “Lens Correction B Channel Compensation Coefficient (effective ...”
• In Table 6 on page 18, changed name of register 0x4C from “LCC6” to “LC_COEFR”
• In Table 6 on page 18, changed description of register 0x4C from “Lens Correction Option
6 (effective ...” to “Lens Correction R Channel Compensation Coefficient (effective ...”
• In Table 6 on page 18, changed default value of register AREF0 (0x4E) from “F0” to “EF”
• In Table 6 on page 18, changed default value of register AREF2 (0x50) from “30” to “60”
• In Table 6 on page 18, changed default value of register AREF6 (0x54) from “3A” to
“7A”
• In Table 6 on page 19, changed description of register bit DSP_Ctrl1[5] (0x64) from
“YUV444 to 422 UV channel option selection” to “SDE enable”
• In Table 6 on page 19, changed description of register bits DSP_Ctrl2[3:0] (0x65) from:
Bit[3:0]: Scaling control
to:
Bit[3]: Vertical DCW enable
Bit[2]: Horizontal DCW enable
Bit[1]: Vertical zoom out enable
Bit[0]: Horizontal zoom out enable