Data Sheet

O
mni
TM
ision
REVISION CHANGE LIST
Document Title: OV7725 (CSP2) Datasheet Version: 1.1
DESCRIPTION OF CHANGES
The following changes were made to version 1.1:
• In Table 6 on page 11, deleted “(see GREEN[7:6] (0x03) for AGC [9:8])” from register
description
• In Table 6 on page 11, changed name, default value, R/W status and description of register
0x04 to “RSVD”, “XX”, “–”, and “Reserved”, respectively
• In Table 6 on page 11, changed default value of register VER (0x0B) from “20” to “21”
• In Table 6 on page 12, changed default value of register COM3 (0x0C) from “00” to “10”
• In Table 6 on page 12, changed default value of register COM4 (0x0D) from “00” to “41”
• In Table 6 on page 13, changed description of register bits COM7[5:4] (0x12) from:
Bit[5]: ITU656 protocol ON/OFF selection
Bit[4]: Reserved
to:
Bit[5]: BT.656 protocol ON/OFF selection
Bit[4]: Sensor RAW
• In Table 6 on page 14, changed description of register bits COM9[6:4] (0x14) from:
Bit[6:4]: Automatic Gain Ceiling - maximum AGC value
000: 2x
001: 4x
010: 8x
011: 16x
100: 32x
101 64x
110: 128x
111: Not allowed
to:
Bit[6:4]: Automatic Gain Ceiling - maximum AGC value
000: 2x
001: 4x
010: 8x
011: 16x
100: 32x
101 Not allowed
110: Not allowed
111: Not allowed
• In Table 6 on page 14, changed name, default value, and R/W status of register 0x16 from
“RSVD”, “XX”, and “–” to “REG16”, “00”, and “RW”, respectively