User's Manual

11
11
BLU ETOOTH ST EREO H EADSET
Pairing Headset with Bluetooth Devices
z List down Bluetooth Address on left Headset body where battery is
mounted and mount battery.
z Click and hold ‘Vol Up’ & ‘ON/OFF’ buttons together for more than 4
seconds. When LED lights and starts to flash, release the two buttons.
LED will then flash continously. This pairing mode will last for 3
minutes and if no pairing is made within this period, the Headset will
return to standby mode. For SE P800 and Sharp GX-30 phones, use
‘Vol Down’ & ‘ON/OFF’ buttons to do the pairing.
z Manipulate the buttons or menus of mobile phone to complete pairing
(Refer to phone manual as the instructions may differ from device to
device). Check if ‘SONORIX Stereo Headset’ or corresponding
‘Bluetooth Address’ is displayed in the list of searched devices. If
device is not found, repeat pairing procedure.
z When prompted to enter PinKey, enter ‘0000’ which is the fixed
PinKey for Bluetooth Stereo Headset.
z The Headset can be paired with up to 10 different devices. Pairing is
done just once and not every time a different device is used.
z For pairing of Headset with PC and usage of related applications
via Bluetooth USB Adapter, refer to the instructions in the
separately enclosed manual.
Remote Control Features
z If the host device supports AVRCP function, the Headset can be used
to remotely control music playback functions.
z To play ‘Next’ song, click and hold ‘Vol Up’ button for 1 sec.
z To play ‘Previous’ song, click and hold ‘Vol Down’ button for 1 sec.
z To ‘Pause’, click ‘MFB’ button once during play.
z To ‘Resume’, click ‘MFB’ button once in ‘Pause’ mode.
z To ‘Stop’, click ‘ON/OFF’ button once during play.
z To ‘Replay’, click ‘MFB’ button twice.
③
V
ol Up Button for “
V
ol
Up” and “Skip” function
② ON/OFF Button for
“Stop” function
① MFB for “Pause”
and “Replay” function
④
V
ol Down Button for “
V
olume Down” and
“Previous” functions