CONTENTS Introduction ......................................................................................................................... 3 Safety Instructions .............................................................................................................. 3 Product Features ................................................................................................................. 3 What’s Included in the Package ..................................................................
Introduction z Thank you for purchasing our Bluetooth Headset H3. z The Bluetooth Headset H3 is a high-tech wireless headset for handsfree operations at its best. It can be connected to any Bluetooth device that supports Headset or Handsfree profile. With soft finger-like grip mechanism that holds the headset firm against the ear wall, the H3 is convenient to wear and stays comfortable even when used for long hours.
What’s Included in the Package Charging the H3 Battery z z z z z z z Before using the headset, charge the battery for at least 2 hours. z To charge, first connect the charger cradle with USB AC/DC charger adapter and then plug the cord into power supply. Mount headset onto cradle and push down until the headset gets locked with red LED on. z During charging, headset LED will light up red and when fully charged, it will change to blue.
Pairing H3 with Bluetooth Device Wearing the H3 z z z To put H3 in pairing mode, in power off state, click and hold MFB continuously until LED will changes to alternating red and blue flash. Pairing mode lasts for 3 minutes, after this period H3 returns to standby mode. z The headset can be worn on left or right ear. Select any one of the two rubber gels that fit your ear secure and comfortably.
Using H3 for Handsfree Operations Answer Call z On an incoming call, bell will ring from both phone and headset. Short click MFB to answer call. Make Call z To make a call, first dial from phone and short click MFB to switch call to headset. Notes: For some phones, after dialing from phone, call will automatically be transferred to headset. Redial z To redial, double click MFB in idle state. Notes: For some phones, when MFB is double clicked, it first displays the numbers last called or received.
Specifications Note : This function can only be used if user has subscribed for such service. Microphone Mute z For privacy reasons, if you don’t want your voice to be transmitted to the other party, you can mute the microphone by long clicking (+) and (-) buttons together during talk mode. To cancel mute function, long click (+) and (-) buttons together. Reconnect z To reconnect headset with phone, short click MFB twice. Multi-Connection z H3 can be connected to 2 devices at the same time.
Product Warranty * OpenBrain Technologies warrants this product against all defects in * * * * * * * * material and workmanship for a period of one year from the date of purchase by end user. The conditions for warranty are as follows: The warranty is valid only if the original receipt issued to the original purchaser by the dealer is presented with the product to be repaired or replaced. The warranty is void if the serial number, date of purchase and product label had been removed.
