User's Manual
Table Of Contents
- Introduction
- Product Functions & Features
- What’s Included in the Package
- Description of Parts
- Clipping the A1 onto Sun Visor
- OLED Display
- Accelerometer Sensor
- Charging the Battery
- Switching the A1 ON/OFF
- Echo & Noise Cancellation
- Pairing and Connecting A1 with Bluetooth Devices
- Using A1 for Handsfree Operations
- Firmware Upgrading
- Specifications
8
Charging the Battery
z If battery level is low, battery level indicator icon will be displayed as empty.
z To charge the battery, connect the handsfree kit to AC/DC power adapter or PC
using the USB Cable.
z During charging, the battery level indicator will flash with the text ‘Charging’
displayed in static motion.
Charging…
z When charged, the text ‘Charged’ will be displayed in flashing motion.
Charged
Switching the A1 ON/OFF
z To switch on A1, slide the power switch to O. With a boot tone, it will first display
the sonorix logo followed by connection state icons and battery level indication. For
battery power saving, display will turn off after 10 seconds.
z To switch off A1, slide the power switch to X.
Except during talk mode, battery power consumption is very low and therefore, it
is not necessary to switch off power. And by keeping the A1 switched on, you
can enjoy the special feature of “Automatic Connection” with phone when car
engine is started.
Switch off power only if device will not be used for more than 1 month.