User's Manual

9
9
Using A1 for Handsfree Operations
Function Action Display
Answer Call
On an incoming call, ‘Ringing’ and ‘Caller ID’ will
be displayed alternately. If Caller ID function is not
supported by phone, then only ‘Ringing…’ will be
displayed. If your phone supports Caller Name
Display, only the caller name will be displayed. To
answer call, short click MFB.
Make Call
To make a call, first dial from phone and call will
be automatically transferred to A1.
Redial
To redial, short click MFB. For some phones, when
MFB is short clicked, it first displays the numbers
last called or received. In this case, short click
MFB again to redial. Note : Some phones allow
direct redial by short clicking MFB just once.
Voice Dial
To voice dial, make sure your phone supports
voice dialing function and that it is activated and
voice tags have been recorded. In idle mode, long
click MFB to initiate voice dial. Follow the rest of
the instructions from phone.
End Call
To end call first, short click MFB during ‘Talk
Mode’. If other party ends the call first, A1
automatically returns to handsfree standby mode.
After call is ended, talk time will also be displayed.
Reject Call
To reject incoming call, long click MFB.
Volume
Control
Short click (+) or (-) to adjust volume. To adjust
volume in continuous increments, click and hold
(+) or (-) button.
Microphone
Mute
For privacy reasons, if you don’t want the party on
the other line to hear your voice, you can mute the
microphone by short clicking MUTE/HOLD button
during talk mode. To cancel mute function, short
click MUTE/HOLD button.
Call
Transfer
During talk mode, to transfer call from A1 to phone
or vice versa, long click MUTE/HOLD button.
HOME
Ringing…
0315966400
Call Transfe
r
Redialing…
Call Ended
V
oice Dialing…
05:30
Mic. Muted
Call Rejected
Call Transfe
r