User's Manual

8
Pairing and Connecting A1 with Bluetooth Devices
Charging…
Function Action Display
Pairing
Mode
To put A1 in pairing mode, while pressing MFB,
slide Power Switch from x to o. Keep pressing until
you see ‘Wait for Pairing’, sonorix A1 and
Bluetooth Device Address. A1 is now ready to be
paired. Pairing mode lasts for 3 minutes, after this
period A1 returns to standby mode.
Note : A1 can be paired with up to 3 devices. To
delete all pairing information, long click MFB while
A1 is in pairin
g
mode.
Pairing
Successful
&
Connection
State
From a Bluetooth phone or PC, search for sonorix
A1. When prompted for pinkey, enter ‘0000’ which
is the pinkey for A1. When paired, you will see
‘Pairing Success’ followed by display of
‘Connection States’ and ‘Battery Level Indicator.
If A1 was paired in upside down position (Car
Handsfree mode), car icon will be displayed and
likewise, if it was paired in upright position
(Speakerphone mode), then the sound icon will be
displayed.
Connection
State
In idle mode, short click volume up or volume
down buttons to check the connection status. If
Bluetooth icon is highlighted, it means A1 is in
connection state.
Reconnect
Function
A1 can be automatically reconnected to the last
connected device in 2 ways, that is, when car
starts to move after engine is started or when A1 is
powered on.
Note: Connecting time depends on the number of
phones paired with A1 as A1 takes turn to connect
to each device starting from the last connected
device.
When A1 is disconnected as a result of getting out
of Bluetooth range, it will attempt reconnection to
last connected device for maximum 5 minutes.
To cancel reconnect function, simply click MFB
when ‘Connecting…’ is displayed.
A1 can also be reconnected manually by long
clicking MFB in idle mode. You will first hear the
beep tone followed by display of
Connecting...’image.
Button Hold
Function
To prevent accidental button activation while the
device is being carried around, lock the button
operations by long clicking ‘MUTE/HOLD’ button.
To unlock, long click ‘MUTE/HOLD’ button.
Wait for Pairing
sonorix
A
1
00150E001A05
Pairing Success
Connecting…