User's Guide

You will usually want to click to “Enable auto start”, and “Start server v2”. The other fields should
have been populated correctly automatically for you. If you are using the optional modem
module, you should also click “Start modem” to enable the modem.
Once complete, you can “Save & reboot” to activate your new configuration.
Warning: Do not set the Wifi mode to “AP+Client” or “Client” before
having configured your Wifi network. Also, do not use client scan mode
with “AP+Client”, as this is not supported! The web interface will prevent
these combinations.
If you have configured this combination manually, the Wifi network will
not start automatically. You need to log in using a USB terminal and
either do a factory reset (see Module Factory Reset) or (better) issue “enable” to enter secure
mode, then issue “config set auto wifi.mode ap” and reboot.
Networking Options
OVMS v3 has a number of networking options to choose from. You can either use these
individually, or combine them to provide failover and alternative network connectivity
arrangements.
OVMS v3 User Guide Page 18 / 86