User's Guide

The wizard should be able to restore access after problems occurring in the process. As a last
resort if it fails to recover at some point, you can always do a factory reset and start over again.
Manual configuration
After finishing the wizard or if you prefer to do a manual setup, the configuration menus will
provide single pages for each module function. These also contain advanced options for the
features, so it’s worth having a look.
Vehicle Configuration
Go to Config / Vehicle:
You’ll want to enter your vehicle type, Vehicle ID (the same as you registered on the OVMS
server), and distance units. You can also optionally enter your timezone (see this article on
GLIBC timezones for information on the format of this, a list of suitable zone strings can also be
found here: https://remotemonitoringsystems.ca/time-zone-abbreviations.php).
OVMS Server v2 Configuration
Go to Config / Server V2 to configure the connection to the OVMS v2 server you will be using:
OVMS v3 User Guide Page 16 / 86