User Manual

4
INTRODUCTION
PLEASE READ THIS FIRST
Thank you for choosing the BikerCom as your motorcycle communications system; we know
you have many choices available and are honored you have put your trust in the BikerCom
system. The BikerCom has been designed to meet all your motorcycle communication
requirements and expectations, if you have any comments, questions or feedback please
contact us at [e-mail] and you will receive a prompt reply.
Before using your BikerCom for the first time it is recommended you read this User Guide to
give you a complete overview of all the system components and functionality; once you are
familiar with the BikerCom, setup and use should be convenient and reliable.
The BikerCom is designed to be used in conjunction with a wide range of communications
equipment such as two way radios, mobile phones, and navigation devices; before using
another device with your BikerCom ensure you are familiar with its operation.
Whenever riding your motorcycle safety should be your first priority. The BikerCom is
designed exclusively for motorcycle enthusiasts and safety was a constant consideration in
its development. Ultimately it is the rider’s responsibility to ensure that their safety and the
safety of any passenger is in no way compromised by use of the BikerCom.
We take this opportunity to wish you safe and enjoyable motorcycling.
QUICK START
1. Connect the Control Box to your motorcycle battery.
2. Connect wired devices to the Control Box.
3. Power On wired devices.
4. Power On the Helmet Headsets.
5. Power On the Control Box.
6. Connect wireless devices to the Control Box.
7. Start your motorcycle.