User Manual
25
NOTE: When connecting the Garmin device to the Control Box MPR wireless connection the
audio signal is only transmitted to the Rider’s Helmet Headset (HHR) the Passenger’s
Helmet Headset (HHP) does not receive the audio signal.
OPTION TWO – CONNECTING TO THE OTHER WIRELESS CONNECTION
Connecting a Garmin device to the Other wireless connection is the secondary setup option;
using this setup option the Rider and Passenger will receive navigation instructions from the
Garmin device. To connect your Garmin device to the Control Box Other wireless connection
see CONNECTING TO THE CONTROL BOX OTHER CONNECTION p23.
NOTE: When using Bluetooth wireless technology to connect to the Control Box the
connection process should be completed within two minutes; if after two minutes the
devices are not connected it is recommended to Power Off the Control Box and devices, and
attempt to connect again.
BIKERCOM OPERATION
CONNECTION PRIORITIES
The Rider’s mobile phone MPR wireless connection is always the priority; thereafter there
are two connection priority scenarios dependant on the connection status of the Control Box
MPR connection. The difference between the two priority scenarios only affects the
functionality of the Helmet Headset Passenger.
SCENARIO ONE
MPR Connection Inactive - i.e. the Rider is not on a phone call.
In this scenario the following connection types take communication priority:
1. MPR
The Mobile Phone Rider wireless connection is the first priority; the Rider’s mobile
phone will always automatically answer an incoming call and can only be heard by
the Rider.
2. HHR – HHP – Other – PTT – Radio – AUX1 – AUX2
The Helmet Headset Rider & Passenger, Other wireless connection, Push To Talk
Button, Two Way Radio, and Auxiliary 1 & 2 wired connections all maintain equal
secondary priority. The Rider is ready to receive a phone call, Rider and Passenger
wireless intercom is enabled, bike to bike Two Way Radio intercom is enabled, Rider
and Passenger can receive navigation instructions and radar detector alerts. Audio is
enabled; Rider and Passenger can listen to music.
SCENARIO TWO
MPR Connection Active - i.e. the Rider is on a phone call.
In this scenario the following connection types take communication priority:
1. MPR
The Mobile Phone Rider wireless connection is active and is the first priority; the
Rider is currently on a phone call therefore the MPR and current phone call is the
priority.