User Manual
23
CONNECTING TO THE CONTROL BOX MPR CONNECTION
The Mobile Phone Rider (MPR) wireless connection enables the connection of the Rider’s
mobile phone or a navigation device to make and receive mobile phone calls and/or receive
navigation instructions. The recommended setup for the MPR connection is to connect the
Rider’s mobile phone or you can connect a Garmin zūmo
®
550 and then connect the Rider’s
mobile phone to the Garmin device to make and receive mobile phone calls. When devices
are connected to the MPR connection only the Rider can hear the audio signal; the
Passenger cannot hear the audio signal. To connect the Rider’s mobile phone or navigation
device to the Control Box the device must be equipped with Bluetooth wireless technology,
if you are unsure about your devices specifications please check with the manufacturer.
The Control Box MPR Connection stores the pairing information of the current or last used
Bluetooth device. For example if you pair a Motorola mobile phone with the MPR connection
the Control Box MPR connection will remember it. After you Power Off the Control Box, the
next time you Power On the Control Box, the MPR connection will automatically search for
the previously paired Motorola mobile phone; the searching and reconnection process
should occur within 30 seconds. However, for example if you first pair a Motorola mobile
phone with the MPR connection and later change, and pair a Nokia mobile phone with the
MPR connection, the Nokia mobile phone becomes the current or last used Bluetooth device.
If you want to reconnect the original Motorola mobile phone with the MPR connection you
will need to repeat the pairing process.
To connect to the MPR wireless connection complete the following steps:
1. Press the MPR Button on the Control Box.
2. The MPR status light will quickly blink red and blue indicating it is in Bluetooth pairing
mode.
3. Activate the Bluetooth function on your device and search for a new device.
4. Your device will now search for Bluetooth equipped devices within range and display
them in a list on your device screen.
5. On your device select BC-MPR.
6. When prompted for the Passcode enter 0000.
7. The Control Box BC-MPR Bluetooth connection is now added to your device;
depending on your device make and model you may need to connect to the BC-MPR.
When successfully connected the MPR status light will display a still blue light.
NOTE: To avoid interference it is recommended to maintain a distance of at least 30cm
between your mobile phone and the Control Box.
CONNECTING TO THE CONTROL BOX OTHER CONNECTION
The Other wireless connection enables the connection of an additional device equipped with
Bluetooth wireless technology such as a navigation device; both the Rider and Passenger
can receive the audio signal. To connect to the Other connection the device must be
equipped with Bluetooth
wireless technology, if you are unsure about your devices
specifications please check with the manufacturer.
The Control Box Other Connection stores the pairing information of the current or last used
Bluetooth device. For example if you pair a Garmin zūmo 550 with the Other connection the
Control Box Other connection will remember it. After you Power Off the Control Box, the
next time you Power On the Control Box, the Other connection will automatically search for
the previously paired Garmin zūmo 550; the searching and reconnection process should
occur within 30 seconds.