User Manual

20
Noise Filter Accessory Continued…
Image not to scale.
CONNECTING WIRED DEVICES TO THE CONTROL BOX
CONNECTING THE PUSH TO TALK BUTTON
The Push To Talk Button activates transmission of the Rider and/or Passengers voice over
the Two Way Radio.
To connect the PTT Button to the Control Box complete the following steps:
1. Ensure that the Control Box is in Power Off mode.
2. Insert the PTT Button Connection Cable 3.5mm pin into the Control Box socket
labeled PTT.
3. Using the PTT Adhesive Pad affix the PTT Button to the left handlebar grip in a
position that is easily accessible with your left thumb.
NOTE: Continuous and repetitious activation of the PTT Button may cause malfunction and
require the BikerCom system to be restarted.
Control Box PTT
Connect to the
Control Box PTT socket.
Two Way Radio
Connect the
Two Way Radio charging/power adapter.
C
Push To Talk Button
Connect the
Push To Talk Button.
Control Box
Connect to the
Control Box Power Cable.
C
Power Cable
Connect to the
Power Cable With Fuse.