User Manual
14
CONNECTION NAME
CONNECTION STATUS LIGHT
CONNECTION STATUS
MPR
Steady blinking blue light
Ready to connect with the
Rider’s Bluetooth equipped device
Still blue light
Connected with the
Rider’s Bluetooth equipped device
Ready for use
Push To Talk Button
No light
Power Off Mode
Still yellow light
Power On Mode
POWERING ON THE CONTROL BOX
There are two options for Powering On the Control Box using either the PTT Button or the
Control Box Power Button.
OPTION ONE – POWER ON USING THE PTT BUTTON
To Power On the Control Box using the PTT Button complete the following steps:
1. Long press the PTT Button for approximately 3 seconds.
When successfully Powered On the Control Box Power status light will display a still
green light and the PTT Button status light will display a still yellow light.
OPTION TWO – POWER ON USING THE CONTROL BOX POWER BUTTON
To Power On the Control Box using the Control Box Power Button complete the following
steps:
1. Long press the Control Box Power Button for approximately 3 three seconds.
When successfully Powered On the Control Box Power status light will display a still
green light and the PTT Button status light will display a still yellow light.
GENERAL GUIDELINES FOR POWERING ON THE CONTROL BOX
The following steps are recommended for general Powering On of the BikerCom system:
1. Connect the Control Box to your motorcycle battery.
2. Connect wired devices to the Control Box.
3. Power On wired devices.
4. Power On the Helmet Headset.
5. Power On the Control Box.
6. Connect wireless devices to the Control Box.
7. Start your motorcycle.