User Manual
13
THE CONTROL BOX
The Control Box is the core of the BikerCom system, all wired and wireless devices connect
to the Control Box and the Control Box then wirelessly transmits the audio signals to the
Helmet Headsets. The Control Box has five 3.5mm Audio Jack sockets for connecting a
variety of input devices and is equipped with Bluetooth
®
wireless technology enabling two
connections with other devices also equipped with Bluetooth wireless technology such as a
mobile phone or navigation device. The Control Box contains electronic components and
care must be taken when handling the unit.
CONTROL BOX STATUS LIGHTS
The Control Box has five status lights that indicate the current status of each connection,
such as the power and if the Helmet Headsets are connected to the Control Box.
CONNECTION NAME
CONNECTION STATUS LIGHT
CONNECTION STATUS
Power
No light
Power Off Mode
Still green light
Power On Mode
Ready for use
HHR
No light
Power Off Mode
The HHR switch is set to OFF
Quickly blinking red light
Ready to connect with the
Rider’s Helmet Headset
Still blue light
with
blinking red light
Connected with the
Helmet Headset Rider
Ready for use
HHP
No light
Power Off Mode
The HHP switch is set to OFF
Quickly blinking red light
Ready to connect with the
Passenger’s Helmet Headset
Still blue light
with
blinking red light
Connected with the
Helmet Headset Passenger
Ready for use
Other
Steady blinking blue light
Ready to connect with a
Bluetooth equipped device
Still blue light
Connected with a
Bluetooth equipped device
Ready for use