User Manual

3. Ensure that the microphone is in a position in front of where your mouth will be

when wearing your helmet; readjust as necessary. The Microphone Positioning

Indicator is a silver strip to aid in microphone positioning; the silver strip should face

into your mouth.

4. Slide the Headset Unit down the Headset Clip until it firmly locks into place.

5. Position the Headset Speakers at the height of your ears in the left and right ear

pockets of your helmet; you will need to test the position several times to ensure

you have selected the optimal position for you and your helmet. Using the included

Speaker Ear Pocket Spacer Dots will aid in obtaining optimal speaker position.

OPTION TWO – INSTALLATION USING THE HELMET HEADSET ATTACHMENT PADS

The Helmet Headset Attachment Pads use hook and loop fasteners to attach the Helmet

Headset to your helmet.

The procedure for installing the Helmet Headset using the Helmet Headset Attachment Pads

is similar to installation using the Helmet Headset Clip; complete the following steps:

1. Affix either the hook or loop pad to the Headset Back Plate.

2. Affix the remaining hook or loop pad to your helmet in a location that ensures the

microphone is in a position in front of where your mouth will be when wearing your

helmet. The Microphone Positioning Indicator is a silver strip to aid in microphone

positioning; the silver strip should face into your mouth.

3. Align the hook and loop pads on the Headset Clip and helmet and firmly press

together.

4. Position the Headset Speakers at the height of your ears in the left and right ear

pockets of your helmet; you will need to test the position several times to ensure

you have selected the optimal position for you and your helmet. Using the included

Speaker Ear Pocket Spacer Dots will aid in obtaining optimal speaker position.

INSTALLING THE HELMET HEADSET SPEAKERS

The Helmet Headset speakers also use hook and loop fasteners to attach inside the ear

pockets of your helmet; the back of each speaker is covered with the hook side and the

Speaker Fastening Dot is the loop side. Before affixing the Speaker Fastening Dot inside the

ear pockets consider using the Speaker Ear Pocket Spacer Dots to adjust the distance

between the speakers and your ears.

QUICK REMOVAL OF THE HEADSET UNIT

To quickly remove the Headset Unit from the Headset Clip press the tab at the top of the

Headset Clip and slide the Headset Unit upwards; for convenience and protection store the

Headset Unit in the included Carry Case.