User Manual

10
HELMET HEADSET VOLUME CONTROL
The Helmet Headset Volume can be adjusted to suit the preference of the Rider and/or
Passenger. The Helmet Headset must be connected to the Control Box to adjust the volume
level.
INCREASING THE HELMET HEADSET VOLUME
To increase the Helmet Headset volume complete the following steps:
1. Ensure the Helmet Headset is in Power On mode and connected to the Control Box.
2. To increase the volume, press the Volume Up + button; the status light will flash red
and blue indicating the volume has been increased one level.
3. To increase the volume another level repeat the above step.
4. The maximum Helmet Headset volume level has been achieved when the status light
displays a still red and blue light for four seconds.
DECREASING THE HELMET HEADSET VOLUME
To decrease the Helmet Headset volume complete the following steps:
1. Ensure the Helmet Headset is in Power On mode and connected to the Control Box.
2. To decrease the volume, press the Volume Down – button; the status light will flash
red and blue indicating the volume has been decreased one level.
3. To decrease the volume another level repeat the above step.
4. The minimum Helmet Headset volume level has been achieved when the status light
displays a still red and blue light for four seconds.
HELMET HEADSET WIRELESS TECHNOLOGY
The Helmet Headset uses proprietary 2.4 GHz wireless technology to connect with the
Control Box and is designed and supported only for connecting with the Control Box. It is
possible but not recommended to connect the Helmet Headset directly with a Bluetooth
equipped device such as a mobile phone however doing so may cause reconnection
difficulties between the Helmet Headset and Control Box thus requiring the wireless
connection between the Helmet Headset and Control Box to be reset. The Helmet Headset is
not a qualified device by the Bluetooth Qualification Body (BQB); reliable performance when
paired with Bluetooth equipped devices is not guaranteed.
With the Helmet Headset in Power Off mode, long pressing the Multi Function Button for
approximately 10 seconds will activate pairing mode, in pairing mode the Helmet Headset
status light will quickly blink red and blue.
RESETTING THE HELMET HEADSET WIRELESS CONNECTION WITH THE CONTROL BOX
When resetting the Helmet Headsets with the Control Box, reset the Helmet Headset Rider
first, followed by the Helmet Headset Passenger. If you only need to reset the Helmet
Headset Passenger remember that the Helmet Headset Rider must first be connected to the
Control Box.
The instructions below provide a step by step overview of resetting the Helmet Headsets
with the Control Box however both Helmet Headsets can be reset simultaneously; simply
long press the Helmet Headset Multi Function Button for approximately 10 seconds until the
status light quickly blinks red and blue, then Power On the Control Box, both Helmet
Headsets will automatically reconnect with the Control Box.