User's Manual

1. ALHOA#1 first pairs with ALHOA#5, then pairs with ALOHA#4,
ALOHA#3 and ALOHA#2, all for 1-on-1 intercom pairing.
At this point, for ALHOA#1, A1 refers to ALHOA#2, A2 refers to
ALOHA#3, and A3 refers to ALOHA #4. ALOHA#5 is no longer in
ALOHA#1’s 1-on-1 intercom pairing list.
2. If ALOHA#3 pairs with ALOHA#5 after paired with ALOHA#1 for 1-on-1
intercom, at this point for ALOHA#3, A1 refers to ALOHA#5 and A2 refers
to ALOHA#1.
8.2 1-on-1 Intercom Usage
Paired ALOHA headsets for 1-on-1 intercom can start intercom transmission in
two modes:
Manual mode and VOX mode.
The default mode when ALOHA headsets are shipped is manual mode. When
ALOHA is powered on, the user will hear “VOX sensitivity Manual Mode”
8.2.1 Manual Mode for starting 1-on-1 Intercom:
The ALOHA headsets already paired for 1-on-1 intercom can use [A] to select
one of the three headsets recorded in the list, as follows:
Press [A] once to start 1-on-1 intercom with A1; press [A] twice to start 1-on-1
intercom with A2; and press [A] three times to start 1-on-1 intercom with A3.