Datasheet
Open-Mesh’s line of low-voltage power supplies and PoE injectors allow the OM Series access
points to be used reliably throughout your site and all around the world.
12-24v PASSIVE PoE
All Open-Mesh OM Series access points
support 12-24v passive PoE, so the
same cable that feeds your access point
data can also provide power. With the
use of a single-port, an eight-port, or a
twelve-port rack mounted passive PoE
injector, you can power your access
points up to 300 feet away.
NEW: The OM2P-HS now supports
standard 802.3af PoE, so you can power
them from a standard PoE switch.
Note: OM2P, OM2P-LC and OM5P routers are not
compatible with 48v PoE switches. Using a PoE
switch or any power supply with more than 24v will
void the warranty.
GLOBAL POWER SUPPLIES
Open-Mesh provides a full range of
power supplies that work in virtually
every country around the world. For
North American deployments, choose
between a 12v supply built to fit inside
the wall cover or a 18v supply that
maximizes power for PoE runs up to
300 feet. For everywhere else, choose
the 20v international power supply with
EU, UK, AU and US plugs. Powering an
enterprise-grade wireless network has
why poe?
Power and PoE
POWER UP ANYWHERE
WWW.OPEN-MESH.COM
Clockwise from top left: single-port PoE injector; 8-port PoE injector; 12-port rack-
mounted PoE injector.
Simple, fast, and clean installations
No need for power outlets at AP site
Centralized power management
Low cost of install and ownership