User Guide

CHAPTER 10: Stripe SMPTE Window
Studio 4 Manual 67
SMPTE, Vision and the Studio 4
The following discusses using the
Studio 4 with Vision. The information is
also applicable to working with Studio
Vision.
Vision uses MIDI Time Code for synchro-
nization, so...
햲 Choose Stripe SMPTE from the
Studio 4 menu and choose MIDI
Time Code from the MIDI Format
pop-up menu.
Figure 10.9: Choose MIDI Format
햳 Disable Jam Sync in the Studio 4
menu.
햴 Choose Options>Receive Sync
Mode>MIDI Time Code in Vision.
햵 Choose Options>Receive Sync
Device>Studio 4 in Vision.
햶 Select the desired playback
sequence, its Sync and its Offset.
햷 Click Play in VisionÕs Control
window. The play button will flash
while Vision waits for sync.
햸 Hit Play on your tape recorder and
Vision will start playing back in sync
with the tape.
Use a similar procedure for recording
tracks into Vision while synchronized to
tape. For more information concerning
Vision’s various sync modes, see your
Vision manual.