User Guide

Studio 4 Manual 53
CHAPTER 8: Saving and Opening Studio 4
State Documents
The combination of the Network Routing
window setup and the MIDI Routing,
Channelizing and Muting window setup is
called a Studio 4 state. You can save
Studio 4 states as documents and open
them at any time. When you open a
Studio 4 state document, it sets the state
of the Studio 4 and updates the Network
Routing window and the RCM window. A
single state document contains Network
Routing window and RCM window data
for all Studio 4's on all networks. You can
save as many Studio 4 state documents as
you need.
The Studio 4 remembers its most recent
state even after the power is turned off.
SAVING A STUDIO 4 STATE
DOCUMENT
To save the Network Routing setup and
the MIDI Routing, Channelizing and
Muting setup as a Studio 4 state
document:
햲 Configure the Network Routing
window and the MIDI Routing,
Channelizing and Muting window as
desired.
햳 Choose Save from the Studio 4
menu.
A standard Macintosh save as dialog
box appears.
Figure 8.1: Saving a Studio 4 State
햴 Type a name for the state and select
the disk or folder in which you wish to
store it.
햵 Click Save to store the Studio 4 state.
Each Studio 4 state document contains:
• Network Routing window settings for
each interface in the current Studio
Setup.
• MIDI Routing, Channelizing and
Muting window settings for each
interface in the current Studio Setup.