User Manual

3
The LED strip can be cut wherever desired, at minimum at one metre intervals. Only an authorised
electrician may cut the LED strip. Before cutting the strip, remove the plug from the socket. Use a
suitable moisture resistant silicone or adhesive to secure the end cap to ensure a sufficiently tight
enclosure (IP65).
Malfunctions are often caused by minor faults. You can easily remedy most of these yourself.
Please consult the following table before contacting the vendor. You will save yourself a lot of
trouble and possibly money too.
If you can't fix the fault yourself, contact your nearest vendor. Please be aware that any improper
repairs will also invalidate the warranty and additional costs may be incurred.