Specification Sheet

Terminal Connect:
DC IN: Operating power supply input (V+).
GND: Operating power supply 0V(ground) and Control signal input 0V(ground).
IN-x: Control signals input.
NOx: Relay switch normally open terminal.
NCx: Relay switch normally close terminal.
Cx: Relay switch common terminal.
Terminal Block:
Pitch 5.0mm/0.197" screw terminal block.
Wire range 24AWG ~ 12AWG / 2.5mm square.
Strip length 7mm.
Screws - M2.5,steel,Cr3+ Zn plated.
Pin header and Cage - Brass.
[e-mail]