User's Manual

ManualsBrandsooma ManualsElectronicsDECT Extender

700-0120-403

Ooma Linx

™

Quick Start Guide

Step 2Step 1Getting Started Quick Reference

The Ooma Linx device allows you to connect additional

telephones and telephony devices to your Ooma Telo. Use

it to connect anything that requires a phone line to your

Ooma setup. This might include a phone in your home ofce,

a fax machine, and other devices. Since the Linx operates

wirelessly, it can be installed anywhere in your home.

To complete the setup process, you will need the following:

NOTE: Each Ooma Telo can only support up to four wireless

DECT devices. The Linx is not compatible with the Ooma Telo

Handset. See the Troubleshooting section for more details.

Plug the Linx device in

To pair your Linx device with your Ooma Telo, nd a

power outlet located close to or in the same room as your

Telo. Plug the Linx in. The system status indicator should

light up amber and then begin to blink as it looks for a

Telo to register with.

Connect your device to the Linx

Your Linx is now ready to be installed anywhere in your

home. Move the Linx to a power outlet close to the device

you want to connect it to. Plug the Linx in and verify that

the system status indicator turns blue after a few seconds.

Using your existing telephone cord, plug your telephone or

telephony device into the phone jack at the bottom of the

Linx device.

Put your Telo in registration mode

Press the Page key on your Ooma Telo and hold it down for

three seconds. The Linx will register with your Telo. Once it

is is connected, the system status indicator will turn blue.

NOTE: Your Linx device may require a software upgrade

the rst time it is connected. While downloading new

software, the system status indicator will alternately blink

blue and amber. DO NOT UNPLUG THE LINX WHILE IT IS

UPGRADING.

Go to

Step 1

Go to

Step 2

Go to

Step 3

System status indicator

• Lights up blue when

connected to the Telo

• Lights up amber when it

does not detect the Telo.

• Blinks amber when it is

attempting to register with

a Telo device.

• Blinks blue and amber

during a software upgrade.

Line status indicator

• Lights up blue when the

line is idle

• Lights up amber when the

line is in use.

Telephone jack

Connect your device to the

Linx with a standard telephone

cable (not included).

Reset pinhole

Used to factory reset the Linx

device.

Front view

Bottom view

Ooma Linx Telephone cable

(not included)

Step 3 Congratulations, you’re done!

You’re all set! Your telephone (or telephony device) is now

connected to your Ooma system and you can immediately

begin to make phone calls. Hear the melodious dialtone?

That’s the sound of Ooma. Dial now!

IMPORTANT: If you are connecting a fax machine,

or other device that sends modem tones over the

phone line, you must complete your setup online at

my.ooma.com/linx.

Please see the additional setup instructions at

www.ooma.com/linx-setup for more information.

2 43 5 61

Summary of content (2 pages)

PAGE 1
Getting Started Ooma Linx ™ Quick Start Guide Step 1 Step 3 Step 2 Congratulations, you’re done! Quick Reference You’re all set! Your telephone (or telephony device) is now connected to your Ooma system and you can immediately begin to make phone calls. Hear the melodious dialtone? That’s the sound of Ooma. Dial now! The Ooma Linx device allows you to connect additional telephones and telephony devices to your Ooma Telo. Use it to connect anything that requires a phone line to your Ooma setup.
PAGE 2
Basic Operation Ooma Premier™ Placing and receiving calls To answer a call, pick up your telephone or press the Talk button on your phone. • Verify that your Ooma Telo is powered on and working properly. The Ooma logo and all of the icons should be lit blue. If you have a regular phone, plug it in to the PHONE port of the Telo to check for dialtone.