Owner's Manual
SERVICE MANUAL
01 5
SERVICE INFO
TORQUETOOLHARDWARE
M6
M8
FRONT AXLE NUT
REAR AXLE NUT
5mm Hex
6mm Hex
19mm Socket
24mm Socket
Most of the hardware on the RCR model is standard and can be found in your local hardware store.
Below is a table of common hardware used on the ONYX RCR along with the torque specications for
each bolt. Use a calibrated torque wrench to tighten bolts to their respective specications and no
more. For bolts that require threadlocker, we reccommend red Loctite 272. You can always request
hardware from us via phone or email: (805) 370-1991 or info@onyxmotorbikes.com
This table below is an at-a-glance guide for the frequently used hardware on the bike. This should give
you an idea of what tools to keep on hand for longer rides.
14nm
30 nm
45nm
80nm
COMMON HARDWARE
HARDWARE
HARDWARE