Datasheet

CONNECTING THINGS
Ontech GSM 9015
DESCRIPTION
Ontech Relay 9035 is an optional equipment to the Ontech GSM
products. The device is controled from Ontech GSM 9035 or Ontech
GSM 9025.
For more information, see www.ontechgsm.com/se or call Onvako AB [phone]
The unit communicates with the
master unit with a short range
radio 2.4 GHz. The operating range
is about 30 meters in free eld and
is enough to work in a normal one
-family house.
It is really simple to connect and
start using. Plug it into a power
wall socket. The unit starts to seek
a master unit and then connects to
it automatically.
You control the unit with an
app, both Android and Iphone
available. You can also use SMS to
control it.
The 230 V socket can be turned
on and o. There is also a timer
function which allows you to turn
it o from 1 second up to 99 hours.
Connect radiators, motor heaters,
pumps or other electrical equip-
ment.
The unit has two alarm inputs
for wired alarm sensors, such as IR
detectors, magnetic switches, level
guards, re alarms etc. The unit
will send alarm messages to up to
9 dierent mobile phones.
A built-in temperature sensor al-
lows you at a distance monitor the
temperature. You can set the unit
to send alarm when the tempera-
ture rises above or falls under the
temperature you decide. Optional
you can buy an external tempera-
ture sensor and connect to the
unit.
If the unit looses connection with
the master unit this will be shown
in the status message.
The unit can act as a radio signal
repeater and forward radio signals
to units that is placed out of the
working range of the master
unit. In this way a big area can be
covered.
There are more smart functions
such as thermostat to set indoor
temperature etc.
Technical specication
• Working temperature range - 40 to + 55
degrees Celsius.
• Socket 230 VAC /16 A
• Power consumption idle <0,5W, maxi-
mum 4 W.
• Two alarm inputs 3-30 VDC can be set
to Normally Open or Normally Closed.
• Internal temp sensor+/- 2 degrees at 25
degrees C and relay o.
• Short range radio 2,4 GHz. Power 1 mW.
• One input contact for external temp
sensor or current measuring (4-20 mA)
• Total weight 180 gram, Size (except
plug) 135*73*35 mm.
Accessories
Ontech GSM 9035
For indoor use. 230 VAC socket can be
turned on and o. Two alram inputs Short
range radio frequency 2.4 GHz.
Built in temperature sensor. Built in back up
battery. Alarm if main power fails. Is pluged
into a power wall socket.
Ontech GSM 9025
For outdoor use. Cabinet according to IP 65.
Is powered with 9-30 VDC or 24 VAC. Power
adapter is included.Potential free relay 230
VAC / 10 A.Two alram inputs Short range
radio frequency 2.4 GHz.
Built in temperature sensor. Built in back up
battery. Alarm if main power fails. Is pluged
into a power wall socket.
GPS receiver can be connected and reports
speed, direction and position.
Resources
App for Android
Ontech Control can be downloaded from
Google Play. The app lets you makes set-
tings, control the unit and receive alarms.
The app works with SMS in the background.
App for Iphone
Ontech Control can be downloaded from
Appstore. With the app you can control and
get status from your Ontech GSM 9035. Due
to restrictions from Apple programming
and alarming can not be made in the app.
Settings by SMS
For user without Android the settings is
made from a smartphones web browser
on the site www.ontechgsm.com/set.html.
A code is generated which shall be pasted
into an SMS and sent to the unit.
PRODUCT SHEET
An orignal product from Onvako developed in Sweden.
PB_15036_EN140409
Article number: 15036 EAN-code 7393639150363