User Manual

- 14 -
• Automaticactivationordeactivationofrelaywhenalarmisacti-
vated
• SettingofNCorNOofalarminputs
• Switchoordelaypowerfailalarm
• Settingradiochannelforshortrangeradio
• SettingsandcontrollingAlarmbox9012andExtrarelay
9010/9015
• SettingsforGarageopenerfunction(onlyAndroid)
Wired alarm sensors
Ontech GSM 9025 has two alarm inputs (A and B) for wired alarms sen-
sors such as PIR, magnetic switch, re alarm etc. The inputs can be set to
Normally Open (NO) or Normally Closed (NC).
Connect according to gures 2 and 3.
Declaration of conformity
Onvako AB, Datavägen 14A, 436 32 Askim, Sweden, hereby declares that
the product Ontech GSM 9025 is in conformity with the provisions of the
Radio & Teleterminal directive R&TTE 1999/5/EG and the Low Voltage
directive 2006/95/EC.
Technical specications
GSM Dualbands GSM 900/1800 Mhz
GSM subscription Any GSM network. Not working in 3G only network.
Mini SIM card.
Relay Potential free, maximum voltage 230 VAC, maxi-
mum current 10 A
Short range radio Reciever Category: Class 3
Separation of person and device >20 cm
Frequency2,4GHz,Outputpower1mW
Alarm inputs Two alarm inputs 3-30 VDC can be set to closing
or opening function (Normally Open or Normally
Closed).
Power 9-30VDC Adapter 13.8 V.
Backup battery Built in 4,2 Litium Polymer 1100 mA