User Manual

-26 -
Add a user to the list
1. Press on the row for the position you want to add. You can add up to three different mobile
numbers on position 1-3
2. A new screen appears.
3. Write the name and mobile number in the fields.
4. Press Send number to GSM unit.
5. An SMS with the settings is now sent to the unit.
6. The unit is returning an SMS that is read into the app. The ring will now turn from yellow to
green and the name and number will appear on the row. This is a confirmation that the
information has been stored in the unit.
7. Repeat if you want to add more users.
8. Press the Android general Back button to go back to the main screen.
Erase a user from the list
1. Press on the row for the position you want to add. A new screen appears.
2. Press Erase position from unit
3. An SMS with the settings is now sent to the unit.
4. The unit is returning an SMS that is read into the app. The name and number will disappear
on the row. The ring is still green. This is a confirmation that the information has been stored
in the unit.
5. Repeat if you want to erase more users.
6. Press the Android general Back button to go back to the main screen.
Get information of users from the unit
If you are not sure about which information the unit has stored you can retrieve it.
1. Press on the row for the position you want to retrieve information about. A new screen
appears.
2. Press Get position from unit
3. An SMS with the settings is now sent to the unit.
4. The unit is returning an SMS that is read into the app. The information will show on the row.
5. Repeat if you want to retrieve information of other positions.
6. Press the Android general Back button to go back to the main screen.
Garage opener function for Iphone
Important! Can only be operated from Android telephones with the Ontech Control app installed.
This function differs between Android and Iphones. Below contains a description for the Iphone. For
Android, see Garage opener for Android on page 25.
With this function you can make the unit recognize up to three mobile numbers. When any of these
numbers are calling the unit the 230 V outlet will turn on for one second and then turn off without
answering the call. This function can be used to open a garage gate when an approved person calls
the unit.
Add a user to the list
1. Press on the row Garage Opener on the main page.
2. Press on the row Add number.
3. Write the mobile number in the field.
4. Choose position 1-3 where the number should be stored.
5. Press Apply on the main page.
6. The message page will now be opened with a complete SMS to the unit. Press Send.