User Manual

-16 -
Important! If you want to change a setting of a function you must also set all other functions you
earlier have set under the tab. The unit will store the information on the setting page and will not
remember earlier settings. Example: If you set a temperature alarm earlier and then you want to
set the alarm delay, you have to set both functions again. The unit only remembers the settings
from the latest SMS sent from each page.
Set the functions with a Smartphone
1. Launch the telephones web browser. Go to the page http://www.ontechgsm.com/set.html.
2. A website named Setting your Ontech Unit opens in the web browser Safari. Tilt the iPhone
to landscape screen position in order to make the text more easily read.
3. There are three subpages for settings: General, Alarmlist and Advanced. Select with the
buttons at the button of the page.
4. For programing the Alarm list under the tab Alarm numbers, see Store numbers in the alarm
list with an iPhone or other smartphone on page 20. It is necessary to program the Alarm
list in order to receive alarm messages.
5. On the page General you will find the most used functions. Press the button.
6. Fill in your Password (see Choose a Password on page 8) in the field on the top of the page.
7. Then make all settings you want to do.
8. When ready, press Create Code
9. In the box the code will appear.
10. Open the Message app on the smartphone (Iphone only).
11. Create a new text message.
12. Fill in the number to the unit.
13. Paste the code in the message field.
14. Press Send.
15. The new settings are now sent to and stored in the unit. The unit restarts with the new
settings. All this takes about one minute. An SMS is sent to the telephone to confirm that the
settings has been stored (Settings successfully updated).
16. If you wish to do settings under the tab Advanced functions, press the button.
17. The repeat 8-17.
Important! If you want to change a setting of a function you must also set all other functions you
earlier have set under the tab. The unit will store the information on the setting page and will not
remember earlier settings. Example: If you set a temperature alarm earlier and then you want to
set the alarm delay, you have to set both functions again. The unit only remembers the settings
from the latest SMS sent from each page.