User Manual

-15 -
Function settings
Set the functions with an Android telephone
1. Launch the app Ontech Control.
2. If a screen appears ”Update my system info”, select Do not update.
3. Press the Android general button for setting. Four buttons will appear. Select Master
Functions.
4. The screen GSM Function appears.
5. There are three tabs on the top of the page; General, Alarm numbers and Advanced functions
6. For programing the Alarm list under the tab Alarm numbers, see Store numbers in the alarm
list with an Android telephone on page 20. It is necessary to program the Alarm list in order
to receive alarm messages.
7. Under the tab General you find the most used functions. Make the settings by pressing the
bar with the functions you want to set and enter a value or make a choice. Then press OK.
8. When all settings has been done scroll down to the bottom of the screen and press the Apply
button. The new settings are now sent to and stored in the unit. The unit restarts with the
new settings. All this takes about one minute. An SMS is sent to the telephone to confirm
that the settings has been stored (Settings successfully updated).
9. If you wish to do settings under the tab Advanced functions, select the tab and repeat 7 and
8.
10. When all settings are done, return to the Main screen by pressing the Android general Back
button.
Set the functions with an iPhone
1. Launch the app Ontech Control.
2. Press the button Settings on the lower part of the screen..
3. Press the button SIM settings. An alert panel appears. Select Ontech GSM 9025 or 9035.
4. A website named Setting your Ontech Unit opens in the web browser Safari. Tilt the iPhone
to landscape screen position in order to make the text more easily read.
5. There are three subpages for settings: General, Alarmlist and Advanced. Select with the
buttons at the bottom of the page.
6. For programing the Alarm list under the tab Alarm numbers, see Store numbers in the alarm
list with an iPhone or other smartphone on page 20. It is necessary to program the Alarm
list in order to receive alarm messages.
7. On the page General you will find the most used functions. Press the button.
8. Fill in your Password (see Choose a Password on page 8) in the field on the top of the page.
9. Then make all settings you want to do.
10. When ready, press Create Code
11. In the box the code will appear.
12. Open the Message app on the iPhone.
13. Create a new text message.
14. Fill in the number to the unit.
15. Paste the code in the message field.
16. Press Send.
17. The new settings are now sent to and stored in the unit. The unit restarts with the new
settings. All this takes about one minute. An SMS is sent to the telephone to confirm that the
settings has been stored (Settings successfully updated).
18. If you wish to do settings under the tab Advanced functions, press the button.
19. Repeat 8-17.