User Manual

NCV78XXXGEVK
www.onsemi.com
6
For debugging purposes, logging of the communication
between GUI SW and Evaluation board can be useful. This
can be enabled in menu “Project” by item “Logs”:
On the right side of the application area, the dedicated
“Logs” window should appear:
Logging of the ongoing commands can be then
started/stopped by clicking check box “Log”:
Current state of the GUI SW including all control
elements can be saved and restored in the “Config” menu.
Please note that format of the number in any text box can
be changed by clicking the right mouse button.
Scripting Support
GUI SW framework allows to access and control all GUI
elements from Python scripts. This can help with evaluation
of the device significantly by automatizing many steps. For
more details about Python scripting look for dedicated
document.
NCV78xxx Device Control and Register Access
From detected daughter boards, select intended one in
menu “Application” or by clicking on its graphical
representation and appropriate “NCV78xxx Device Control
and Register Access” window will open. Window consists
from several parts, on the left side the section for control of
external pins is available and on the right side, either high
level application control is available or all internal SPI
registers can be accessed via “Control registers”, “Status
registers” or “Trimming constants” tabs.