Manualshelf

User Manual

ManualsBrandsonsemi ManualsLED Driveronsemi NCV78XXXGEVK LED Driver Platform Evaluation Board
12345678910
NCV78XXXGEVK
www.onsemi.com
2
Table 1. ABSOLUTE MAXIMUM RATINGS
Parameter
Value
Unit
Supply Voltage (V
BAT
)
−0.3 to 60
V
Output LED Current
3
A
Junction Temperature
−40 to 175
°
C
Ambient Temperature
−40 to 105
°
C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
Table 2. RECOMMENDED BOARD OPERATING CONDITIONS
Parameter
Value
Unit
Supply Voltage (V
BAT
)
6 to 40
V
Output LED Current
3
A
Ambient Temperature
−40 to 105
°
C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
Table 3. INTERFACE FUNCTION DESCRIPTION
Connector Name
Connector Type
J_PWR
DC POWER JACK 2.5MM
J_VBAT1(2,3,4,5,6)
BANANA RED 4MM
J_GND
BANANA BLACK 4MM
J_OUT1(2,3,4,5,6)
2 pins / 5.08 mm / Header Terminal Block
J_ONMCU_
2 pcs 1 x 17 pins / 2.54 mm / Socket Header
J_BST_L1(2,3,4,5,6)
2 x 4 pins / 2.54 mm / Dual Socket Header
J_BST_R1(2,3,4,5,6)
2 x 6 pins / 2.54 mm / Dual Socket Header
J_BCK1(2,3,4,5,6)_L
2 x 8 pins / 2.54 mm / Dual Socket Header
J_BCK1(2,3,4,5,6)_R
2 x 6 pins / 2.54 mm / Dual Socket Header
J_CAN
3 pins / 3.5 mm / Header Terminal Block
SCOPEGND
Wire Bridge
Test points
TEST POINT TH 1MM