User Manual

NCV78XXXGEVK
www.onsemi.com
10
Installation of GUI SW
1. Run “setup.exe” installer:
2. Follow instructions and click Next button until finish:
a)
b)
c)
d)
e)
f)
3. Connect USB mini cable to PC
In case the USB drivers for GUI SW are not yet present on
PC, the following procedure should be used:
4. Open Device Manager (Press Win+R and type
devmgmt.msc)
5. Update Driver of not correctly installed device “CDC
Virtual Com” by Right button click and select “Update
Driver Software”