User's Manual
Playing05
14
En
Chapter 5:
Playing
Playing a disc
1 Press
DISC
on the remote control or
INPUT
repeatedly on the main unit to switch the source
to [
DISC
].
2 Press
<
to eject the disc tray.
3 Load a disc with the printed side facing up.
4 Press
<
again to close the disc tray.
Playback starts automatically after a few seconds.
• If playback does not start automatically, press 1; to
start playback.
Playing from a USB storage device
This system can play .mp3 files that are copied onto a
supported USB storage device:
• Flash drive
• Memory card reader
• HDD: hard disk drive (This product can detect only a
portable HDD with USB power peak current no more
than 500 mA.)
Note
• Pioneer does not guarantee compatibility with all USB
storage devices.
• NTFS (New Technology File System) file system is not
supported.
1 Connect the USB storage device to the
USB
socket.
2 Press
USB
on the remote control or
INPUT
repeatedly on the main unit to switch the source
to [
USB
].
Playback starts automatically.
If playback does not start automatically,
1 Press
/
to select an album.
2 Press
:
/
9
to select a track.
3 Press
1;
to start playback.
Controlling playback
During playback, follow the instructions below to control
playback.
Buttons Functions
1; Pause or resume playback.
∫ Stop playback.
:/9
Skip to the previous or next track.
Press and hold to rewind a track or
search forward fast within a track.
/9
Skip to the previous or next album
when no less than one album exists.
REPEAT
Select an available play mode.
• Repeat 1 [REP ONE]: repeat the
current track
• Repeat all [REP ALL]: repeat all
tracks
• Repeat album [REP ALB]: repeat
the current album (only USB
function)
SHUFFLE
Select an available play mode.
• Shuffle : play tracks randomly
Shuffle is unavailable for
programmed tracks.
X-EM22_SYXE8_En(NorthAmerica).book 14 ページ ２０１６年７月１３日 水曜日 午後３時３４分