User's Manual

En-17
The following table describes the UP-AR1’s status.
STATUS LED Main device’s display Status
Off PORT UP-AR1 is not connected to AV receiver.
Solid Lighting – AirPlay can be played.
Blinking
Starting UP-AR1 is starting.
No Network
Not connected to Network. Please connect an Ethernet cable
or set up a Wireless LAN. (En-10, 11)
If the setup fails and Network connection is impossible, reset
the UP-AR1 to its factory defaults. (En-14)
Faster Blinking Clear UP-AR1 is resetting to factory defaults.
UP-AR1_En.indd 17 2011/04/22 10:42:29