User's Manual

En-14
Wake Up On AirPlay
Even when the Main device is in standby mode, it
can be turned on by AirPlay playback.
Use e/r to toggle between “On” or “Off”.
Note
This function is enabled when the STATUS LED on
UP-AR1 is lit.
When this function is set to “On”, the standby
power consumption of the Main device increases.
Web Setup URL
This function displays the URL to make the WEB
settings.
You can enter this URL on your personal computer
to obtain information on UP-AR1 and perform
several settings.
Tip
If you want to restore the default settings, press
ON/STANDBY while holding down PORT on the
Main device after “Starting” has gone off from the
Main device’s display (for AV receivers).
■
•
•
■
Setup
Follow the procedure below to make the settings
of UP-AR1.
1
Press PORT followed by SETUP on the remote
controller.
2
Use q/w to select an option.
Wi-Fi SetUp
Make the Wi-Fi settings. For details on the setup,
refer to “Performing the setup without the WPS
button” (En-11).
Note
These settings can only be made when the Ethernet
cable is unplugged.
If the “Wi-Fi SetUp?” option is not displayed, unplug
the Ethernet cable and reconnect the UP-AR1
connection cable.
Auto Input Select
The Main device’s PORT selector is automatically
selected upon AirPlay playback.
Use e/r to toggle between “On” or “Off”.
■
■
UP-AR1_En.indd 14 2011/04/22 10:42:29