User's Manual

En-10
Network Setup
Follow either of the procedures below to perform
your network connection.
Note
The wording of displayed items may vary according
to the Main device.
Tip
Press RETURN to go back one screen.
Wired connection (Ethernet cable)
1
Connect the UP-AR1 to your router with an
Ethernet cable.
2
Set the Main device power to on.
Main device
Connecting the UP-AR1
Connect the UP-AR1 to the Universal Port on your
Main device as shown below.
UP-AR1_En.indd 10 2011/04/22 10:42:28